Standardstecker BR8ES 5422

[How is it used?
Used for SEA BASSTS125R.
Application:Off-road (Closed course)
Period of use:About 2 years or so
Purchased about 3 Repeats.
Replacement for NGK Iridium Plug BR8EIX 4813

Was the one you received as per Image?
Image is correct. It's a decent plug, and the accuracy and quality are perfectly fine. NGK is the best.

Was the installation difficult?
No problem, easy work. However, be careful not to overtighten when tightening. I didn't have a plug wrench that would fit this product, so I used a hex socket to install and remove it.

How was your experience with it?
Compared to the Iridium Plug BR8EIX 4813 that came with the car when it was delivered.
I didn't feel any change at all, both the torque and acceleration felt the same. I thought the Standard Plug BP5HA was fine!
Rather, my seniors told me that the Standard Plug BP5HA is better than the Iridium plugs because the 2nd stage is easier to cover. So I decided to go with the Standard Plug BP5HA. So I decided to go with the Standard Plug BP5HA.
The Iridium plugs were extremely hard to start when they were covered.
Even if the Standard Plug BP5HA got covered, it came back to life after cleaning it with Parts cleaner etc. and drying it.
The worst that can happen is that the product is covered with it. I think it's good to exchange the product gracefully because it won't hurt Wallet at all even if it happens.

[Included Parts:were they on?
None

[Was there anything that disappointed you?
None

Point and hang of installation
Anti-seizure agent on the screw part of the Plug (Anti-seeds、CopperCompoundetc.) can be applied to prevent it from becoming a Trouble the next time it is replaced.
I've been doing it that way for more than a decade, and I've never had a problem with the plug burning off.
Also, it's not enough to tighten the plug as hard as you can, so read the product description carefully and do the work.

Product Name
N.G.K. Japan Special Ceramics Standard Plug BR8ES 5422

Item Number
BR8ES

Vehicles
Kawasaki KDX125SR

Number of man-hours
About 10 minutes

Why did you choose this product?
I initially bought this as a spare part for my KDX125 that I was using for off-road fun.
I bought it because it is a 2-stroke engine, and even if you usually rev it at high rpm, there is a possibility that you may get it damaged by fire loss after a fall, driving in the rain, etc.

Impressions after using it
The Plug was covered during off-road driving, so I replaced it and used it.
I was able to use the plug itself without any defects (which is normal since it is an OEM product).

By changing the plug, I was able to run more energetically, so I decided to always carry a spare plug when I ride my 2-stroke motorcycle.

▼ Attention
If you don't have a Plug wrench, you won't be able to work locally, so you will need to carry the wrench along with the Plug.

[How is it used?
I used it on my TZr50R.
Because the Plug which I used until now seemed to be severe soon, I made it new.
I thought about using the BR9ES, but I chose this product because of the Plug that came with it originally.

Was the one you received as per Image?
It was just like the picture.
NGK's Plug is safe and reliable! There is no mistake if you buy this one.

How was your experience with it?
If you don't have a side cowl, you can replace the TZr50R in about a minute by inserting the Spanner from the side.
I replaced it with the same one, so I can't feel a clear difference, but the tone is stable and good.

【Review】
I know it's inexpensive, but you can't go wrong with an NGK Plug!
Because there is a thing that Plug becomes CUB and it becomes a starting failure in the place where 2-stroke goes out, it is possible to be relieved if Plug is always prepared also as a reserve.

[How is it used?
I recently had the opportunity to run Circuit with the MOTARDWheel and purchased it.
I usually play Enduro, so I use #7 and #6.
I prepared number 8 because I was afraid of burning too much with number 7.

Was the one you received as per Image?
As per Image

Was the installation difficult?
Just loosen and reattach. Just check the box for the specified Torque angle and you're good to go.

How was your experience with it?
The burn was right on target.

[Included Parts:were they on?
Not particularly

[Was there anything that disappointed you?
Not particularly

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
KTC's Plug Wrench Short (https://www.webike.net/sd/20024621/)
This makes it easy to attach and remove in tight spaces.

I used it for ksr2 B2.
It has lasted for 8,000 miles. It has a tremendous life span. It's a 2-stroke rider's best friend because it's so cheap and has a long lifespan!