Sie greifen anscheinend aus Europa zu.
Möchten Sie bei webike.eu.com?
60.04 EUR (11,270 JPY)
Lieferinformationen
-
Bitte wählen Sie zuerst das Produktformular aus.
Ausstattung
-
GROM
21- 21.3-[JC92-1000001-]
-
GROM
17-21 17.7-21.3[JC75-1000001-]
-
MONKEY125
18-21 18.7-21.9[JB02-1000001-]
-
MONKEY125
21- 21.9-[JB03-1000001-]
Alles sehen
HONDA
-
MT-09
17-21 17.2-21.8[RN52J]
-
NMAX
21- 21.6-[SEG6J-000001-]
-
SV650
22- 22.1-[VP55E-100005-]
-
SV650
16- 16.8-[VP55B-100000-]
-
KATANA
19-22 19.5-22.2[2BL-GT79B]
-
V-STROM250
18- 18.10-[LC6DS11AZ01103705-]
Alles sehen
SUZUKI
-
Z900RS
17-22 17.12-22.9[ZR900C-000001-]
Einzelheiten zum Produkt
[Installation time] 0.2h
[Size] 80mm (length) x 140mm (width)
[Adjuster mechanism] 10-way (18 degree intervals)
[Set components]
・Main body (set of 2)
10mm right hand thread x 2
10mm left hand thread x 1
8mm right hand thread x 2
8mm left hand thread x 1
**Please make sure to check the vehicle before placing an order.
Also, this is a reference for installation time and is not a guide for labor charges.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*The color of the product may vary depending on the shooting conditions, monitor, product lot, and left and right of the set product, but returns or exchanges is not accepted.
*Due to the characteristics of the product shape and manufacturing process, this product may have uneven color due to electrode marks and air accumulation during coloring.
*10mm/8mm mounting screws are included.Use the same diameter as that of the vehicle body.
*Please adjust the bracket to fit the car body and confirm that there is no interference.
*Images include other products and colorings.
*There may be changes in product specifications due to the manufacturer's reasons.
HONDA/Kawasaki/SUZUKI
*This product can be installed as it is if the mirror mounting part is right handed screw on both sides.
YAMAHA
*For vehicles with mirror mountings that are left handed screw on either side, be sure to use the stock adapter.
.
The Radical Mirror has been updated with a Turner mechanism.
Mirrors with an innovative design not found in standard mirrors.
Just by installing it, you can change the image of your vehicle and make it look different from the past.
In addition to the styling, the mirror surface is large enough to facilitate rearward vision, and the rearview mirror is also large enough to allow the driver to see the rear of the vehicle.
It also has an adjuster mechanism to bring the mirror to the user's preferred position.
Adjustment method
The angle can be adjusted by loosening with a 6mm hex wrench.
The angle can be adjusted in 18 degree increments.Align with the groove when tightening.
The groove may be crushed if it is tightened while it is riding up.
[New standard]
・For other types than circular, such as square type, a circle of 78mm in diameter must be accomm odated
・The length and width must be less than 120mm and 200mm, respectively
・Structure to soften the impact when the mirror comes in contact with pedestrians
・The center of the reflective surface must pass through the center of the gnawing device and be at least 280mm outward from a vertical plane parallel to the direction of travel
*Please note the installation instructions.
Vorsicht
* Wenn eine Bedienungsanleitung enthalten ist, wird diese auf Japanisch verfasst sein.