Sie greifen anscheinend aus Europa zu.
Möchten Sie bei webike.eu.com?
KIJIMA
RE46J 40mm hinten 30mm oben Griff für XSR125 XSR155 MTM125 BVF1 MT
Produkt # 204-3397
(0 Bewertungen)- Auf Lager
44.08 EUR (8,274 JPY)
Webike Punkte: +248 pt
(1.32 EUR)
Lieferinformationen
-
Bitte wählen Sie zuerst das Produktformular aus.
Ausstattung
YAMAHA
Öffnen Sie die Tabelle mit den Passform-Informationen
-
XSR125
24 RE46J
-
XSR155
20-23 BBS1 BBS5 BBS8 BBSA (By Indonesian model)
Produktbeschreibung unten wird automatisch übersetzen durch Google.
Einzelheiten zum Produkt
[Material] Steel
[Size] (Refer to the size diagram)
・Part A length: 735mm
・Length of part B: 140mm
・C section length: 75mm
・D section length: 120mm
・Number of handle Φ: 22.2mm
・40mm closer to rider than the stock handlebar
・30mm higher than the stock handlebar
・Tracker bar length: 230mm
・Tracker bar thickness: 13mm
**Overall width: -20mm, Overall height: +35mm (Overall width: ±20mm / Overall height: ±40mm
*If you have installed it on an XSR125, you do not need to change hoses/harnesses/wires, but if you are concerned about it, please change the brake hoses etc. to appropriate lengths.Since the handling is changed, please check and adjust the tension of the clutch cable and so on.
*Regarding the right side lever holder section when mounted on the XSR155, the clamp position of XSR155 should be fastened with the lever holder in the appropriate position.
*In case of XSR155, loosen the attachment bolt of the meter bracket and change the brake hose routing.
*Since the lever holder is designed for the XSR125, it is partially on the bent part of the handlebar.In addition, depending on the condition of the local specification license plate bracket and the way it is cut, the brake hose may not reach when the handlebar is turned fully, so the brake hose should be extended to the appropriate length.
*Even if you have a free day, it will take more time than expected to remove the cowl and work on the special bar ends, so we strongly recommend consulting with the authorized dealer where you purchased the bike before replacing it by yourself.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
.
Handlebar (40mm back, 30mm up) in matte black and chrome colors for mounting on the XSR125/XSR155, the youngest sibling of the famous XS, and the memento of Yamaha's traditional SR, reinforced with VVA and delta frame.
In order to naturally tame the XSR's overflowing power, the grip position is adjusted 30mm higher and 40mm closer to the rider compared to the stock handlebar, making it a little more comfortable.
The tracker bar can be customized with a bar pad for an even more intrepid form.
Vorsicht
* Wenn eine Bedienungsanleitung enthalten ist, wird diese auf Japanisch verfasst sein.
NEUANKÖmmlinge GEBRAUCHTTEILE FÜR
NEUANKÖmmlinge GEBRAUCHTTEILE FÜR
NEUANKÖmmlinge GEBRAUCHTTEILE FÜR
Neue Ankünfte bei Gebrauchten
Neue Ankünfte bei Gebrauchten
Kundenbewertungen
Es gibt noch keine Kundenbewertung.
Inspiration für den kompletten Custom-Umbau
