Multistangehalter Spiegelklammertyp

Passt:HONDA 400X 13 NC47 ABS[Frame No.] NC47-1000001 or later, HONDA 400X 13 NC47 [Frame No.]NC47-1000001 and later, HONDA 400X 19-21 NC56 *Right and left front side OK, HONDA CB125R 18 JC79, HONDA CB150R

Easy to install! Many uses!

Ausgezeichnet

Jul 27, 2022

Was the one you received as per Image?
As per Image
I own several Motorcycles and have installed them on all of them.

Was the installation difficult?
It's easy

How was your experience with it?
For mounting a camera, a smart phone, etc... It increases the convenience of the Handlebar and its surroundings.
The weight is not a concern. Wind and weight do not affect Handling.

Hilfreich?

Ausgezeichnet

Feb 14, 2022

JUST for Sports

I used to use a Stem Mount Holder, but many times when I turned the key, the Stem Mount Holder got in the way and I got frustrated.
It's also annoying that I've broken the fixed Hook on the Smart Holder twice when I've put Helmet on the Tank or something;

I ordered a number of mounts from various manufacturers, and after a lot of trial and error, I finally decided on a mount that was JUST right.
The Cowl is too low for the recent sports models, and if you use a higher Mount Bracket, it will interfere with the Cowl, but this Mount is fixed to the Mirror Hall, so it will not hit the Cowl.

I should have chosen this one from the beginning. Crying 。

Hilfreich?

Ausgezeichnet

Feb 13, 2022

Used in 3 car models

[How is it used?
Used on KawasakiD Tracker, KawasakiNinja250R and KawasakiZ400.
Smartphone Holder, used to mount a USB charging port.
Installed with Mirror Holder as described in the product description.
Traveling:Street riding, Touring

Was the one you received as per Image?
As you can see in the image, this is a great way to hold a smartphone holder that cannot be attached to the Handlebar.

How was your experience with it?
The above four models are not included in the list of compatible models, but I think they can be installed on any model as long as the Handlebar has an Up Mirror Holder.
If you don't have a Mirror Holder, you can buy one separately and install it, so you don't have to give up just because it's not included in the list.
This product was especially useful for the Ninja 250R, which has a separate handle, so there is no space to mount a smartphone holder, etc. on the handlebar.
The installation was done using the Mirror Holder for all models.
The installation itself is not a difficult task if you allow enough time, so take your time and don't rush.
This product is made of steel, so if it is exposed to rain, there is a large possibility that it will rust if there are scratches on it. It is better to protect the painted surface with wax etc. as much as possible.
Mine never got rusty.

[Points to note]
As mentioned earlier, the installation itself is easy, but it is recommended that the positioning be carefully considered so that it does not interfere with Handlebar operation.
It is especially important to install the product in such a way that you don't hit your hand on the product or the attached smartphone holder, etc. the moment you do so, since most people probably do so with their left hand.
Installing it on the throttle side is also a good idea, but some demerits make it difficult for right-handed people to operate the phone, so think carefully before choosing a product.
(This product is also easy to mount in Large, but I recommend using HandlebarCenter as much as possible if you want to mount your phone.)

How did it compare to other products?
When compared to the aforementioned products that allow the Smartphone Holder to be attached to the HandlebarCenter.
It is easy to interfere with Handlebar operation.
There is a lot of eye movement.
There is a Demerit of etc.
On the other hand, I think the Merit is the convenience that this product can be installed on any motorcycle as long as you have a Mirror Holder.

Point and hang of installation
Attach to Mirror Holder (To be co-located with Mirror) Don't forget to adjust the angle of the mirror when using the camera.
Position and install the unit so that it does not interfere with operation.
If you follow the following tips, you will be able to drive safely.

Hilfreich?

It is easy to install by cotightening Type to Mirror screw.

Sehr gut

Aug 18, 2021

[How is it used?
I'm using the ActionCamera co-tightened to the Mirror screws.
Was the installation difficult?
It's easy to remove the Mirror, insert this product and install the Mirror again.
How was your experience with it?
There was no vibration and no discomfort.
[Was there anything that disappointed you?
There is a hole in the Bracket, but it is suitable for using through the Cable, but I am worried about the strength of the Bracket under the vibration. I feel that this hole is not necessary.
It's made by Manufacturer, but it's pricey.

It is easy to install by cotightening Type to Mirr...

Hilfreich?

Sehr gut

Aug 9, 2020

Safe.

I bought this to attach my phone folder to my SUPER CUB.
It's a safe manufacturer and no problem at all.
I'm also indebted to DAYTONA for a little bit of other things. (^_^)