KSR80, but the carburetor seemed to be overflowing.
So I thought about replacing the Needle Valve.
The OEM Needle Valve Assembly is still available from the manufacturer, but it will cost 300 If you're willing to pay close to 300 yen, you can get a fuel regulating part for 4400 yen from Quantity:I wanted to buy a product from Key Star that was in the Set.
I have almost all the parts I need for the carburetor overhaul, plus a few parts in LargeSmall and Quantity to adjust for fuel economy.:It is set. 。 It also comes with an instruction manual for fuel tuning, which is very useful.
The main purpose was to replace the Needle Valve, but I also wanted to adjust the bumpy feeling in the middle range of the Axel, which is unique to KSR, so this is a very good introduction to carburetor adjustment for beginners.:It was Set
I wanted to replace the Needle Jet when I replaced the Main Jet, but the Washer, the part that goes between the Main Jet and the Needle Jet, was not in Quantity.:I did not replace the Needle Jet this time because it was not included in the set. 。 I plan to purchase the missing Washer from OEM Parts at a later date and replace the Needle Jet.
As a result, with the air cleaner shielding removed and the PRO's Kill silencer in place, I settled on MJ #82.5, SJ #29.0, Jet needle”S”Clip 2-stage. SJ #29.0, Jet needle”S”Clip 2-stage I settled on MJ #82.5, SJ #29.0, Jet needle”S”Clip 2-stage.
Detail anzeigen