Stem Stabilisator

The OEM front fork of the GROM is quite fluffy and I wanted to install an OHLINS, but there is no Gold.

Basically, it is a snap, or firm, feeling when the load is applied to the front.

The handlebar is a little heavy while driving, but this leads to stability, especially when entering the corner.

I think the quality and rigidity is very good.

The top screw hole is 5mm hexagon and easy to lick, so you need to be careful.

If you're replacing the Filter on your Air box with Other Brand Product, I think you'll hit a little Screw.

I installed it on a Type 2 Grom
The wobble of the corner hard braking down the mountain pass is much less and you can attack with confidence You can get in

Considerable Recommendation

【What made you decide the purchase?】

I was worrying about it for a while, and my acquaintance was installing, I bought it when I heard the effect.
【How was it actually used?】

Grom 's soft Front fork becomes a little tightly.
Although the movement of Front fork is also improved, because steps can not be stepped on, the steps etc will not change, it will be don!.
The sharpness of straight-ahead Handlebar will disappear and it will be easy to ride.
Because I attach Handlebar Stopper, Small turning becomes worse.

【Was it difficult to install? (Hard parts case)】
I heard that Bolt is stiff, but if you prepare an accurate hexagon you can remove it without problems. I tried to install because the size of the hexagon was different on the upper and lower sides, but I finished it safely with the prescribed Torque with the hand tool. Regulation from NORMAL Torque is low, so be careful.

【Please tell me the point of installation and hang (in the case of Hard parts)】

I also wrote the above, it is not so difficult if I move forward one by one firmly.
Tightening properly will cause problems such as thread cutting and mountain crushing.
Let's secure it in Torque wrench for safety.

【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?]
Instruction Manual is easy to understand, even if you are an amateur you can do with tools. But I wonder if the picture of Instruction Manual was hard to see ...

【Hope for Manufacturer - Please let me know if you have any improvement points]

Performance is satisfactory, but if the price is a little cheaper it is a full mark.
【Have you compared items?】
None
[Others]

When Air Filter is replaced with Takegawa or Endurance, Bolt seems to be hit by Air cleanerBox.
I was hitting the acquaintance, but he said that there was no problem.
And, it has become convenient to the ground sometimes.
When hanging Handlebar Lock, when it was not attached, it was locked a bit back from where you completely cut the Handlebar, thanks to the included Handlebar Stopper, the fully locked state becomes the position where the Handlebar Lock is possible and the lock is easy became.
It is convenient to the ground.

Because the Frame bent slightly after hitting the Front in the accident, I bought OUTEX 's Stem Stabilizer for Front enhancement.
When removing Fork 's Bolt at the time of installation, I tried to remove it with a cheap Hexagonal Wrench, so the hexagonal hole got licked (Lol)
I immediately took them to the Motorcycle shop and removed them and installed them..
Although it was impression after riding after installation, it became a feeling that Grom was on a slightly larger Large Motorcycle, handlebar operation became easier, and it became Large but it was not scary even with one handlebar.
I think that this COSPA is pretty good at 10,000 yen level.
When I remove it I think Fork 's Bolt was a demon Torque and I think that it is super easy if I do not do it properly in Wrench.