Erhöhungs-Linksatz Höherlegung

As for the height, it goes up about 4-5cm. If you have a normal body type, I think it will be worse for your feet.
The Rear is up, and the Caster happens, but it's just right for city use.

It was installed in the year 2008 ETRACKERX.
Although it is a very simple installation, it is sometimes referred to as the Parts being used around the legs and is very tightened with Torque.
With the simple tool of Sunday Craft Level, I could not burn KATANATA.
I think that it is better to work after preparing Glasses Wrench etc. of Large as it is.
* In us, trying to relax Bolt to strength, the one of Glasses Wrench has broken.

It is the condition of the high lift of the bottom, but it did not rise as much as I thought ... honestly.
Usually when you touch the foot around to high lift, you need to apply the extension of Side Stand because the body is too sleepy when using Side Stand, but with this LINK it can be used with OEM Length without worrying about that.

In my case, I installed Spiral's High seat in addition to this LINK and it was about finally about ideal.

Footing is slightly improved.
Street driving is easier.
The driving feel is unchanged, and the ride quality is almost the same.
It is good because it is not noticeable when put on.

[How is it used?
I bought this product so that even my short-legged uncle can feel safe when playing in the mountains.

Was the one you received as per Image?
It looks sturdy with a thick steel Plate, just like Image.

Was the installation difficult?
Quantity of Bolt & Nut:If you remove the 2 Set, you can easily remove the OEMLink Plate, and then install this product in the reverse order of removal, and you're done!
However, let's implement Grease up because it is a good idea.

How was your experience with it?
It was no more than a Bolt1 pc minute longer than the OEM Plate, so I'll be honest. It won't make much difference." I installed it like that...................................
The footing has improved dramatically, but because the STAND is Standard Spec, the motorcycle stands up too much when stopped, and I'm afraid that the motorcycle will fall over when I take my eyes off it.
Please sell Short Stand for KDX220SR by DRC.

[Included Parts:were they on?
A very simple paper Instruction Manual is included in the package, but the process itself is simple enough that you shouldn't be confused.
If you're still worried about DIY, ask your regular Shop or a friend who is good at machine work.

[Was there anything that disappointed you?
Nothing in particular, because the effect can be confirmed firmly and the strength seems to be enough.
It's going to last a long time

0Other items that may be useful include
Point and hang of installation
As I mentioned above, you can use Bolt and Nut as Quantity:2 SetThis is a very straightforward product to remove and replace.
Just make sure you manage Torque.

[Availability and clarity of the Instruction Manual
No Instruction Manual is available
It is just a matter of replacing the two Plates.
If you still don't get it, then you're either a straight up PRO or you're not. A friend. Let's ask the

[Notes/Items to be purchased together].
Adjust the balance in a timely manner by using the front fork protrusion etc. to match the rear.

[Opinions and requests to Manufacturer
I would also like to see a Short Stand sold to go with the Lowdown Link.

I installed it for a sense of security because a light weight woman is riding on it. I am satisfied with the way it lowers my eyesight.